Sika Monotop 1010 Formerly Monotop 610

SKU
ID13612
Non Hazardous
A bonding primer and reinforcement corrosion protection cement based slurry containing recycled waste materials.
Available in 25Kg bags
£66.65 £55.54
In stock
Product Description

Sika MonoTop 1010 is a 1 pack, cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. Formerly Sika Monotop 610.

Contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar.

Best Uses

Sika Monotop 1010 is a professional grade bonding primer for use with Sika concrete repair systems. This bonding primer provides reinforcement corrosion protection and is suitable for the control of anodic areas. Ideal for interior and exterior use.

  • Uses recycled waste materials
  • Easy to use, just add water
  • Good adhesion to concrete and steel
  • Good resistance to water and chloride penetration
  • Can be applied with a brush or by wet spray technique

Application

Prepare as per data sheet instructions.

Thoroughly pre-wet the prepared substrate a recommended 2 hours before application. Keep the surface wet and do not allow to dry. Before application remove excess water e.g. with a clean sponge. The surface must appear a dark matt appearance without glistering. Surface pores and voids must not contain water. Using a suitable clean brush, roller or suitable spraying equipment, cover the substrate in a thin layer filling all unevenness, pits and voids.

Reinforcement corrosion protection
Using a suitable clean brush or spraying equipment, apply a first coat to cover the reinforcement bars ~1 mm thick. When the first coat is finger nail hard, apply a second layer ~1 mm thick. If using a spray method, protect substrate from excessive over-spray. Wait until completely dry before applying repair mortar.

Sika MonoTop Concrete Repair System

Technical Details

Approvals

  • Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations
  • CE Marking and Declaration of Performance to EN
    1504-7- Product for reinforcement corrosion protection

Technical Info

Components: One Part
Type: Portland cement, cement replacement, re-dispersible polymer powder, selected
aggregates and additives
Finish: Powder
Stock Colours: Grey
Tintable: No
VOC Content: 0.0g per Litre
Volume Solids: -
Suitable Substrates: Concrete
Application Method: See data sheet
Theoretical Coverage: Bonding Primer ~1.5–2.0 kg of powder per m2 per 1mm layer thickness

Reinforcement Corrosion Protection ~2.0 kg of powder per m2 per 1 mm
layer thickness
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life:

~90 minutes for 20 % water (machine applied)

~120 minutes for 21 % water (manual application)

Touch Dry: -
Overcoatable:

Apply concrete repair mortar wet on wet onto bonding primer.

Apply concrete repair mortar wet on dry onto reinforcement corrosion
protection.

Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: 12 months from date of production if stored properly in original unopened, sealed and undamaged packaging in dry and cool conditions
Packaging: Available in 25 Kg Bags
Product Video