Axalta Corroless ACO Mastic Rapid Grade a solvent free, fast curing, two pack polyurethane repair mastic for pipe coatings.
Axalta Corroless ACO Mastic Rapid Grade is suitable for the use of coating of field joints, repair of damaged coatings, filling of holes and cracks, on steel pipelines and other steel structures. This Rapid grade is specifically developed for use at lower ambient temperatures. For temperatures above 25oC the Mastic Standard Grade should be used, as this Rapid grade will be too fast curing.
All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams
Steel: blast clean to minimum Sa2½ (ISO 8501-1:2007), surface profile depth 75-100μm. Mechanical tools may also be used providing a profile of minimum 75μm. Do not polish the steel surface
Overlap onto existing pipeline coating: remove any loose material to establish a firm edge. Feather sound coating and abrade surface to provide a key. Thoroughly abrade to remove gloss, surface contaminants etc. by suitable method (sweep blasting, abrasive disking etc.)
Concrete: remove all laitance and other contaminants by most appropriate methods. Ensure the concrete is dry to a reading of <16% on the Wood Moisture Equivalent (WME) scale. Prime with Corroless ACO LV Sealer
Designed for application by brush, roller, putty knife, trowel or spatula.
- Meets the requirements of GBE/CW6 Part 1 for External Pipe Protection
- BS6920 Factory and site application and WRAS water fittings directory
- Meets the performance requirements of BS EN 10290 and AWWA C222
- Malaysian SPAN approved
|VOC Content:||0 g/litre|
|Suitable Substrates:||Pipe Coatings|
|Theoretical Coverage:||1.0 m2/litre based on Wet/Dry Film Thickness of 1mm / 0.2 m2/litre based on Wet/Dry Film Thickness of 5mm|
|Wet Film Thickness (WFT):||1mm / 5mm|
|Dry Film Thickness (DFT):||1mm / 5mm|
|Pot Life:||Approx. 5 min at 25°C|
|Hard Dry:||40 mins at 20°C|
|Overcoatable:||After 15 minutes at 20°C|
|Fully Cured:||6 days at 20°C|
|Cleaner / Thinner:||Clean with Thinner No.4 / Do not Thin|
|Shelf Life:||Minimum 24 months if stored in dry coll conditions and protected from frost|
|Packaging:||Available in 10 x 250g|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.