Hempel Hempadur 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating with very good adhesion and high temperature, water and chemical resistance.
Hempel Hempadur 85671 is formulated for use as an interior lining in tanks, pipelines, railcars etc. for hot water, brine, crude oil, vegetable oils and other chemicals as per the Chemical Resistance Guide, ONLY shades 11150 and 50900. ALL other shades including Aluminium (19000) can ONLY be used as an external coating for the protection of insulated (CUI) and uninsulated process pipework and vessels including cryogenic conditions.
- In crude oil: Maximum: 130°C/266°F
- In vegetable oils: Maximum: 60°C/140°F
- In water (maximum gradient 15°C/27°F): 95°C/203°F
- In accordance with ARAMCO's specification APCS 2A, 2B and 2C
- Conforms to Norsok M-501, system no. 3C, 3D, 3E and 3F
- Complies with Section 175.300 of the Code of Federal Regulations Title 21 – Liquid and Dry Foodstuff
- Approved by WRAS for potable water up to 23°C/73°F. Shades:11150 Light Grey / 50900 Light Red
|Type:||Amine Adduct Cured Phenolic Epoxy Novolac|
|Stock Colours:||11150 Light Grey, 11630 Off White, 50900 Light Red, 19000 Aluminium|
|Tintable:||Yes, upon request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||317 g/L|
|Suitable Substrates:||For interior lining of tanks, pipelines, railcars for the storage of hot water, brine, crude oil, vegetable oils and other chemicals. Some shades (19000 Aluminium) is suitable for unisulated process pipework and vessels including cryogenic conditions|
|Application Method:||Airless spray / Brush (touch up)|
|Theoretical Coverage:||6.8 m2 per litre for 100 microns|
|Wet Film Thickness (WFT):||150 microns|
|Dry Film Thickness (DFT):||100 microns|
|Pot Life:||3 hours at 20°C|
|Surface Dry:||1.5 hours at 20°C|
|Overcoatable:||See data sheet|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||HEMPEL'S THINNER 08450|
|Shelf Life:||1 year for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production. Shelf life is reduced at storage temperatures above: 25°C/77°F|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.