Mapei Antipluviol S, 10 Kg

SKU
id11644
UN1263 (Class: 3, Pk Grp: II)
A ultra high performance, transparent, siloxane resin, water-repellant impregnator to protect exposed concrete, stone, bricks and tiles from rain.
Available in 10 Kg Drums
£210.89 £175.74
In stock
Product Description

Please note: There is a 3 week lead time on delivery of this product

Mapei Antipluviol S is an ultra high performance, transparent, siloxane resin, water-repellant impregnator to protect exposed concrete, stone, bricks and tiles from rain.

Antipluviol S is a colourless liquid made from silanes and siloxanes in solvent, characterised by its capacity to penetrate deeply into all absorbent mineral-based materials used in the building industry. Applied to a porous surface, Antipluviol S penetrates deeply and reacts with natural humidity to form a water-repellent layer inside pores and capillaries. Without altering appearance, Antipluviol S provides efficient protection against aggressive atmospheric agents that penetrate structures. The Antipluviol S water repellent treatment also improves the self-cleaning effect of façades and reduces the adhesion of moss and weeds.
Antipluviol S does not form a skin and, therefore, does not substantially modify permeability to water vapour.
Antipluviol S has excellent resistance to the alkalis present in cementitious materials and to UV rays and maintains its water-repellent properties for a very long time.

Best Uses

Mapei Antipluviol S is perfect for repair of plastered walls exposed to rain, preventative treatment of exposed concrete against carbonation, colourless water repellent protection of historic buildings or those of special architectural value, water repellent treatment of walls and face bricks. Antipluviol S has a high rate of UV protection.

Perfect for basements, water tanks, lift wells and areas subject to water pressure, walls subject to rising damp carrying salts, gypsum surfaces, synthetic plasters and surfaces decorated with synthetic paint.

Not suitable for horizontal surfaces.

Application

Carry out an initial test to ensure no colour changes take place when Antipluviol S is to be used on natural stones, coloured renders or other substrates without uniform absorbency. Remove all dirt, dust, grease, oil, paint, salt laitance, moss and weeds from the surface before treating. Always apply onto dry surfaces. To apply Antipluviol S evenly, it is advisable to use a manual shoulder mounted sprayer for large surfaces and a roller or brush for smaller surfaces or for walls with many windows. Apply the product until saturation point by applying one coat after another while still wet. Once Antipluviol S has been applied, the surface cannot be painted. Any painting must therefore be done beforehand using inorganic paints (silicate paint, for example). Do not apply if there is a likelihood of rain, apply between 5°C and 30°C.

Technical Details

Notes

  • Apply the product at a temperature between +5°C and +30°C
  • Do not apply if the humidity level is higher than 85%
  • Coverage depends on substrate porousity - see data sheets for further details

Technical Info

Components: One Part
Type: Solvent Based
Finish:
Stock Colours: Colourless
Tintable: No
VOC Content:
Volume Solids:
Suitable Substrates: For exposed concrete structures, cement renders, cellular cement, facebricks, exposed concrete blocks, natural and artificial stone, non-glazed ceramic tiles, etc
Application Method: Brush, Roller, Backpack Sprayer
Theoretical Coverage:
  • Concrete: 0.15 - 0.50 Kg per m2 per coat
  • Cement Render: 0.25 - 0.80 Kg per m2 per coat
  • Facebricks: 0.30 - 1.00 Kg per m2 per coat
  • Natural Stone: 0.10 - 0.80 Kg per m2 per coat
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry:
Overcoatable:
Fully Cured:
Cleaner / Thinner: White Spirit
Shelf Life: Store Antipluviol S in closed packaging in a dry place indoors, well away from flames and sources of heat.
Packaging: Available in 10 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use