Mapei Antipluviol

SKU
id110758
Non Hazardous
A colourless water-repellent impregnator treatment based on silicon compounds in water solution.
Available in 5 and 25 Kg
From £25.42 £21.18
In stock
Only %1 left
Product Description

Please note, this product has an expected delivery lead time of 4 weeks.

Mapei Antipluviol is a colourless water-repellent impregnation treatment based on silicon compounds in water solution.

Best Uses

Mapei Antipluviol is best used as a colourless protection against rain of exposed concrete structures, cement renders, cellular cement, face bricks, exposed concrete blocks, natural and artificial stone etc. Mapei Antipluviol can be also used to repair plastered walls exposed to rain or to protect period buildings or those of special architectural value.

Application

Remove all dirt, dust, grease, oil, paint, salt laitance, moss and weeds from the surface that may prevent Antipluviol from penetrating deeply. Antipluviol should only be applied to dry surfaces. Application is recommended via a backpack spray gun onto large areas or roller / brush onto small areas. Once Antipluviol has been applied, the surface cannot be painted.

Technical Details

Features

  • This product is unsuitable for horizontal surfaces, basements, water tanks, walls subject to damp carrying salts, lift wells or areas subject to water under pressure, gypsum surfaces, or synthetic plasters and surfaces decorated with synthetic paint.
  • Carry a test first on a small, hidden area.
  • UV resistant
  • No need to dilute
  • Do not apply Antipluviol if the level of humidity is higher than 85%

Technical Info

Components: One Part
Type: Water Based
Finish:
Stock Colours: Colourless
Tintable: No
VOC Content:
Volume Solids: 5%
Suitable Substrates: For concrete structures, cement renders, cellular cement, facebricks, exposed concrete blocks, natural and artificial stone, etc.
Application Method: Brush, Roller, Backpack Sprayer
Theoretical Coverage:
  • Facing Bricks: 0.50 - 0.75 kg per m2
  • Conventional Render: 0.50 - 0.80 kg / m2
  • Tuff Stone: 0.50-1.00 kg per m2
  • Cementitious Smoothing Layers: 0.20 - 0.40 kg per m2
  • Marble: 0.20-0.50 kg / m2
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry:
Overcoatable:
Fully Cured:
Cleaner / Thinner: Water
Shelf Life: Can be stored for 24 months a dry place, well away from flames and sources of heat at a temperature between +5°C and +30°C. Protect from frost.
Packaging: Available in 5 and 25 Kg

Related Products