£7.75 delivery on orders excluding certain products & postcodes *
Teknos TeknosPro Binder - Dust Binder
SKU
ID19845
Non Hazardous
Dust binder for use on indoor walls and ceilings.
Available in 18 Litres in Colourless
From
£90.17
£75.14
In stock
Only %1 left
Product Description
Teknospro Binder - Dust Binder is a water-borne, colourless, acrylic-based dust binder for walls and ceilings indoors. The product has been classified in Emission Classification of building materials to Group M1.
Best Uses
Teknospro Binder is best used for dust binding of untreated concrete, brick, building blocks, building boards etc. indoors. Colourless Teknospro Binder does not colour or darken treated mineral surfaces. The treated surface can be over coated with Teknos water-borne indoor paints if needed.
Application
The surface to be treated must be clean and dry. Teknospro Binder is a product which is ready to use and which can be tinted to transparent shades, if needed. This attention colouring helps to ascertain that a sufficient dust binding film has been applied. Application by brush, roller or airless spray once or twice. Suitable nozzle for airless spray is 0.013 - 0.017".
Application conditions: The surface to be treated must be dry. The temperature of the ambient air and the surface shall be above +5°C and the relative air humidity below 80%.
Technical Details
Approvals and Certificates
- M1 Classification
Technical Info
| Components: | Single Pack |
| Type: | Water-borne |
| Finish: | n/a |
| Stock Colours: | Clear |
| Tintable: | Yes, to Teknos Tranparent Interior Colours tinting group and pale RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | max. 30 g/l. |
| Volume Solids: | Approx. 14 % by volume |
| Suitable Substrates: | Concrete, Brick, Building Blocks, Building Boards |
| Application Method: | Brush, Roller or Airless Spray (nozzle 0.013 - 0.017") |
| Theoretical Coverage: | 10 m²/l Applied once onto a smooth surface |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Drying Time, Dust free: | 30 minutes at 23°C |
| Next Treatment: | After 1-2 hours at 23°C |
| Fully Cured: | - |
| Cleaner / Thinner: | Water. Wash the equipment immediately after use with detergent and warn water |
| Storage: | Must be stored tightly closed and kept cool |
| Packaging: | Available in 18 Litres |
Related Products
RODO All Purpose Paint and Varnish Paint Brush
A general contractor all purpose paint brush in various sizes.
From
£2.69
£2.24
RODO ProDec Mini Paint Rollers - 4 Inch
Available in a blue stripe for strong solvents of synthetic style for white spirit or water.
From
£4.36
£3.63
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Bedec Dust Sealer for Concrete, Brick Plaster and Masonry
A transparent, water-based product for sealing and reducing dust from porous and powdery surfaces.
£113.86
£94.88
RODO ProDec Mini Roller Handle Frame PRFR012 - 4 Inch
Suitable for 4 inch roller refills.
From
£2.60
£2.17
Centrecoat Concrete & Brick Sealer
A acrylic water based impregnation treatment which protects by giving added strength to a concrete or brick substrate.
From
£55.08
£45.90
Coo-Var G136/T Floor Sealer
An ideal and economical solution for use on all kinds of concrete floors to prevent dusting.
£50.54
£42.12
Rustoleum 5220 EpoxyShield Clear Sealer Primer
EpoxyShield Clear Sealer Primer and floor sealer 5220, a water based clear and non yellowing coating.
£56.39
£46.99