*Rustoleum Trade Ultra Scrubbable Matt - White - 4 Litres *CLEARANCE*

SKU
ID21679
***
This product is now discontinued. See Mapei Dursilite as a potential alternative.
£21.60 £18.00
In stock
Product Description

Please note, this product has been discontinued. See Mapei Dursilite as a potential alternative.

Rustoleum Ultra Scrubbable Matt is a multi-purpose matt wall and ceiling paint. Particularly suitable for painting walls and ceilings in large-scale new construction and renovation projects.

Best Uses

Rustoleum Ultra Scrubbable Matt is a multi-purpose matt wall paint based on an acrylic dispersion. Scrub-resistant, Class 1. Easily applicable and good coverage. Particularly suitable for painting walls and ceilings in large-scale new construction and renovation projects. For interior use and protected exterior surfaces.

Ideal for contractor or trade use.

Rustoleum Ultra Scrubbable Matt is suitable surfaces include: existing coats of wall paint, cement and plasterwork, concrete, brick, gypsum panelling, board, etc. Also suitable for painting glass fibre fabric.

  • Scrub-resistant, Class 1 (DIN EN 13300)
  • Good coverage
  • Virtually odour-free
  • For interior use and protected exterior surfaces
  • Matt

Application

The surface must be capable of supporting the paint, completely set, clean, dry, and free from dust or grease. Sand and repair surface irregularities. Remove and/or repair all loose and unstable coats. In the case of exterior applications, remove all moss, mould and algal growth.

For new, untreated substrates

  • Prime highly absorbent surfaces in their entirety using Stabilising primer.
  • Thoroughly clean powdery surfaces. Prime using Stabilising primer after allowing to dry.
  • Paint to cover after allowing to dry.

For existing intact coats of wall paint

  • Clean using paint cleaner.
  • Apply an intermediate coat of Wall Primer Opaque if necessary.
  • Apply the top coat after allowing to dry.

For existing, non-load-bearing coats of wall paint

  • Remove loose parts.
  • Thoroughly wash powdery coats and allow them to dry.
  • Carry out any repairs.
  • Prime with Stabilising primer.
  • Apply the top coat after allowing to dry.

For areas with contamination caused by nicotine, damp, rust or soot

  • Clean thoroughly using Paint cleaner.
  • Treat surface/stain with sealing primer.
  • Apply the top coat after allowing to dry.

The systems described above apply for the most common types of surface. For specific applications and / or detailed advice, please contact our technical team.

Stir thoroughly prior to use. The first coat can be diluted with a maximum of 10% water. Apply in 1 or 2 coats using a suitable brush, paint roller or paint sprayer. Always work wet-on-wet to prevent visible brush strokes. Back-roll all overlaps in the same direction. Do not touch up when drying.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Matt
Stock Colours: White
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 30 g/L
Volume Solids: 40%
Suitable Substrates: Suitable surfaces include: existing coats of wall paint, cement and plasterwork, concrete, brick, gypsum panelling, board, etc. Also suitable for painting glass fibre fabric.
Application Method: Brush, Roller or Spray
Theoretical Coverage: 8m2 per litre per coat
Wet Film Thickness (WFT): 125 microns
Dry Film Thickness (DFT): 50 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After 4 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: Minimum of 12 months in the tightly sealed original packaging in a dry, cool and frost-free place.
Packaging: Available in 4 and 10 Litres