£7.75 delivery on orders excluding certain products & postcodes *
Bradite HD Floor and wall is ideal for interior concrete, wood or steel floors that require a tough, quick drying, hard wearing and flexible floor coating with good chemical and excellent water resistance. It can be used with a low slip additive to provide additional under foot traction.
You will need to thin the first coat on new or uncoated concrete, wood or plaster by 20-30% this will enable penetration and binding of the substrate. Application and use should always conform to the codes of practice described in BS 6150 and BS5493.
Brush and Roller – supplied ready for use. Thin, if required, with 0 - 5% water. On smooth substrates, the use of a short pile roller is advised.
Conventional Air Spraying - Thin with 10 - 20% clean water as required, tip size - 2.0mm, tip pressure 60psi (0.4MPa) approximately.
Airless Spraying - Thin with 0-15% clean water as required, tip size - 18 thou (0.46mm) approximately, tip pressure - 2100 psi (15MPa) approximately.
For further details on painting concrete, wood, plaster or other absorbent surfaces, please check the product data sheet, or call our Technical Team for advice.
Components: | Two Pack |
Type: | Water Based |
Finish: | Gloss |
Stock Colours: | Clear |
Tintable: | Yes, to most BS and RAL Colours. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | <2 g per Litre |
Volume Solids: | 57% (mixed) |
Suitable Substrates: | Concrete, steel, ceramic & terracotta tiles |
Application Method: | Brush, Roller or Spray |
Theoretical Coverage: | 13 m2/L/coat |
Wet Film Thickness (WFT): | 100 microns/coat |
Dry Film Thickness (DFT): | 57 microns/coat |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 3 hours at 20°C |
Overcoatable: | After 14 hours minimum at 20°C |
Fully Cured: | 6 days at 20°C |
Cleaner / Thinner: | Water |
Shelf Life: | 12 months minimum in original unopened containers. |
Packaging: | Available in 5 Litres for colours. Clear available in 4.2 Litres |