Bedec Blockfill a high build obliterating masonry paint for internal walls formulated to provide a smooth surface in lieu of the expense of rendering and plastering.
Bedec Blockfill is a high build obliterating water based masonry paint for internal walls. Designed to infill block and brickwork and renovate acoustic ceiling tiles, Blockfill gives a smoother surface where cost of rendering and plastering is prohibitive. With just one coat usually all that is required, Blockfill is ideal for use on factory, warehouse stockroom walls as well as stables, barns and agricultural buildings.
Bedec Blockfill is best used as a cost effective way of providing brickwork and other walls with a smooth surface without the need for rendering and plastering. All you will need when using Bedec Blockfill is one coat in most circumstances, as it offers excellent adhesion and pigmentation. Bedec Blockfill has a good coverage rate of 6-10 m2 per litre and is available in 20 litre tubs for large coverage.
Bedec Blockfill can be applied using brush, spray or roller for quick and easy application. Small tricky areas should be applied using a brush and larger surface areas with a spray or roller. After just one hour Bedec Blockfill will be touch dry and ready to recoat after 4 hours, if necessary. After just one night being left to cure, Bedec Blockfill will be fully cured and you will be left with your desired effect.
Surface and Environment
Bedec Blockfill should be applied onto bare block work or acoustic ceiling tiles. when painting other substrates make sure you prime first with good quality water based primer and thin the first coat with 10% water. Bedec Blockfill is designed for use in internal environments and is available in black, magnolia and white.
- Spread of Flame Tested to BS 476 (part 7: 1997) on Plasterboard Rated Class 1
|Tintable:||Yes, Minimum order quantity of 4x 20 Litres for a tint to RAL or BS shades. Please note, bespoke tints are non refundable / exchangable.|
|Suitable Substrates:||For internal walls and ceilings, suspended ceiling tiles, brickwood and blockwork|
|Application Method:||Brush, Roller, Spray|
|Theoretical Coverage:||6 - 10 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 4 hours at 20°C|
|Fully Cured:||1 day at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||12 months in original containers|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.