Intulac Ultra Top Coat is part of a high performance fire protection coating system for interior wood surfaces. Available in a Matt or Satin finish.
Fire retardant coatings are not designed to upgrade doors to fire doors, fire retardant coatings will provide Class “O” spread of flame but will NOT provide any minutes protection.
Bollom Intulac Ultra Top Coat Matt or Satin has been designed to provide a Class 0 fire rated protective and decorative varnish finish system for interior wood. Bollom Intulac Ultra Top Coat significantly reduces the ignitability of soft and hard woods and other wood derivatives including plywood, chipboard, fibre insulation board, hard board and veneer.
Interlac varnish offers a reduction of ignitability to soft and hard wood and other wood derivatives such as plywood, chipboard, fibre insulation board, hard board, also on veneering that are thicker than 12 mm. Bollom Interlac insulates against heat, checks fire, as well as preventing the propagation of fire and diminishes flue-gas density and flue-gas temperature.
Bollom Intulac Ultra Top Coat Matt or Satin is part of a fire protection system designed for internal use. When used in conjunction with Intulac Base Coat, the system provides high performance fire protection comprising a clear, transparent, water-based, base-coat and a clear, solvent-based, protective top coat; both available in matt and satin finishes.
We can confirm that the Bollom Intulac Ultra system will be suitable to upgrade bare interior gluelam timber, min 12mm thick, to achieve a Class 0 Fire rating.
Bollom Intulac Ultra Top Coat Matt or Satin can be applied using brush, roller or spray - offering ease of application, with a touch dry time of approximately 1 1/2 hours when applied at 20 degrees celsius. It is fully cured after 6 days (under the same conditions). Bollom Intulac Ultra range has been formulated for the professional painter and decorator but all products are easy to apply and have been fire tested to BS 476 Parts 6, 7.
Surface and Environment
Bollom Intulac Ultra Top Coat is ideal for use in communal areas and internal buildings. It is ideal for a variety of wood substrates and works to insulate heat, inhibit the spread of flame and diminish flue gas density and flue gas temperature. This product should be applied over Bollom Intulac Ulta Intumescent Base Coat.
- Class '0' fire rating when applied over 2 coats of Bollom Intulac Ultra Intumescent Base Coat
- Simple 3 coat system to achieve Class "O" spread of flame
- Single pack products, no mixing required
- For all hard and soft woods and most wood derivatives
- Ideal for communal areas
- Protects and highlights the natural beauty of wood
- Can be used over previously varnished surfaces (with sound adhesion)
- Easy to apply, single-pack system (no mixing necessary)
- Theoretical coverage 25m2 per litre
- 1 x 500ml tin will cover 12.5 m2
- Application by brush, conventional spray or roller
- Available in 500ml.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.