Johnstones Trade Stop Mould

SKU
id17196
Non Hazardous
A water based matt internal emulsion paint specially formulated to resist mould growth for areas prone to intermittent damp conditions.
Available in 5 Litres
From £69.77 £58.14
In stock
Only %1 left
Product Description

Johnstones Stopmould is a water based matt internal emulsion paint specially formulated to resist mould growth for areas prone to intermittent damp conditions.

Best Uses

Johnstones Stopmould is suitable for interior use on new and aged plaster, wall boards, concrete, cement rendering, block work and brickwork. Ideal for the protection of internal areas at risk of mould growth such as basements, external walls, conservatories and utility rooms.

Application

Ensure the surface to be painted is clean, dry and free from loose or flaking matter. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Wear a suitable face mask when dry sanding. Surfaces already contaminated with mould growth should be treated with Johnstone’s Sterilisation Wash as directed.

Stir well before use. Suitable for application by brush, roller or spray. For spray application, or the first coat on porous surfaces, thin with up to 1 part water to 5 parts Johnstone’s Stopmould. Do not apply when air or surface temperature is below 5˚C.

Technical Details
Components: One Part
Type: Water based emulsion
Finish: Matt
Stock Colours: Brilliant White and Magnolia
Tintable: No
VOC Content: 15.0g per Litre
Volume Solids: 23%
Suitable Substrates: Suitable for interior use on new and aged plaster, wallboards, concrete, cement rendering, blockwork, and brickwork
Application Method: Brush, Roller, Spray
Theoretical Coverage: 9-11 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 25 microns
Induction Time: -
Pot Life: -
Touch Dry: 1-2 hours at 20°C
Overcoatable: After 2-4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Water
Shelf Life: 5 years
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.