Johnstones Trade Aluminium Paint is a solvent-borne, protective metallic finish formulated for use on suitably prepared metal surfaces such as storage tanks, ducting and pipework. Based on an oil varnish medium and aluminium flake it will withstand temperatures up to 150˚C.
Johnstones Trade Aluminium Paint is ideal for the exterior of storage tanks, ducting and pipework. Avoid areas that are consistently handled to prevent the transfer of aluminium. Withstand temperatures up to 150˚C, Johnstones Trade Aluminium Paint also benefits from solar reflective properties. also benefits from solar reflective properties.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Any rust should be removed by wire brushing. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Prime bare surfaces with the appropriate Johnstones Specialist Primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Stir well. Easy to apply by brush or roller. Do not apply over polystyrene surfaces.
|VOC Content:||500.0g per Litre|
|Suitable Substrates:||For metal surfaces that aren't consistently handed|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||14 - 16 m2 per litre|
|Wet Film Thickness (WFT):||66 microns|
|Dry Film Thickness (DFT):||32 microns|
|Overcoatable:||After 16 - 24 hours at 20°C|
|Cleaner / Thinner:||White Spirit|
|Shelf Life:||5 years|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.