Johnstones Trade Aluminium Wood Primer is a solvent-borne formulation for interior and exterior use on new or bare timber, providing a barrier against the oily exudations of naturally resinous timber.
Johnstones Trade Aluminium Wood Primer is a blend of fine grade aluminium and high quality resin, that can be used as a sealer on weathered creosote or smoke damaged surfaces and is also self-knotting. For use on new or bare timber. Seals weathered creosote or smoke damaged surfaces. Primes resinous, scorched and smoke damaged timber and is also self knotting.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Wash down oily timbers such as teak with White Spirit and allow to dry. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
Stir well before use. Easy to apply by brush paying particular attention to the end grain.
|Stock Colours:||Metallic Grey|
|VOC Content:||High VOC content 25–50%|
|Suitable Substrates:||For use on new or bare timber|
|Theoretical Coverage:||13–15 m2 per litre depending on the nature and porosity of the surface being painted|
|Wet Film Thickness (WFT):||75μm|
|Dry Film Thickness (DFT):||28μm|
|Recoatable:||16–24 hours under normal drying conditions|
|Cleaner / Thinner:||Johnstones TC2 Thinner and Cleaner|
|Packaging:||2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.