£7.75 delivery on orders excluding certain products & postcodes *
Johnstone's Trade Flame Retardant Durable Matt provides a quick dry, low odour formulation making it ideal for use on internal wall surfaces and ceiling areas where a durable, washable hard wearing finish is required. For use on internal linings, broad wall and ceilings. Johnstone's Trade Flame Retardant Acrylic Matt inhibits spread of flame, providing a flame retardant coating.
Johnstone's Trade Flame Retardant Durable Matt is part of the wide range of Fire Retardant and Intumescent Coatings available from Promain.
Surfaces must be sound, clean, dry and free from all loose and flaking materials, dirt, grease or other surface contaminants. Rub down previously painted surfaces with a fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New or bare surfaces should be coated with a mist coat of Johnstone’s Flame Retardant Durable Matt, thinned with up to 10% clean water. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces, as they may contain harmful lead.
Stir thoroughly before use. Apply two coats by brush, roller or spray as required. For spray applications, thinning may be required. Airless Spray = 017-019 thou tip, 200 bar (2000-3000 psi). An additional coat may be required if thinning to meet the required film build for the flame testing.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Components: | One Part |
Type: | Water Based |
Finish: | Matt |
Stock Colours: | |
Tintable: | Available in 16,000 colours via the Johnstone’s Tinting System. Please note, bespoke tints are non refundable / exchangeable. |
VOC Content: | 140.0g per Litre |
Volume Solids: | 34% |
Suitable Substrates: | For use over new non-combustible or previously painted surfaces |
Application Method: | Brush, Roller or Spray |
Theoretical Coverage: | 10 m2 per litre |
Wet Film Thickness (WFT): | 83 microns |
Dry Film Thickness (DFT): | 28 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | |
Overcoatable: | After 4 hours at 20°C |
Fully Cured: | |
Cleaner / Thinner: | Water |
Shelf Life: | 5 years |
Packaging: | Available in 5 Litres |