Johnstones Trade Stormshield Self-Cleaning Masonry Paint has been formulated using nano technology in order to give an extremely smooth and dirt resisting finish to masonry. Suitable for application to exterior cement rendering, rough cast, brick and concrete.
Johnstones Trade Stormshield Self-Cleaning Masonry Paint is suitable for external use on masonry as a low maintenance, self cleaning paint. This coating is also highly flexible. Suitable for application to cement rendering, rough cast, brick and concrete.
- Unique nano particle technology
- Flexible, dirt resisting smooth finish
- 15 years life expectancy
All surfaces to be painted should be clean, dry and free from loose and flaking material. Treat fungal or algal growth with Fungicidal Wash as directed. Seal absorbent surfaces with a coat of Stormshield Self-Cleaning Masonry, thinned up to 10% with clean water. Wear a suitable face mask when creating dust.
Stir well. Easy to apply by brush or long pile roller. Do not apply in temperatures below 5°C or when rain is imminent.
|Tintable:||Tintable to a range of colours available in the Johnstone’s Trade Colour Card. Please note, bespoke tints are non refundable / exchangeable.|
|VOC Content:||15.0g per Litre|
|Suitable Substrates:||For exterior cement rendering, rough cast, brick and concrete.|
|Application Method:||Brush, Long Pile Roller|
|Theoretical Coverage:||10 m2 per litre|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||30 microns|
|Touch Dry:||1-2 hours at 20°C|
|Overcoatable:||After 12 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||5 years|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.