Jotun Aluminium Paint H.R. (Heat Resistant) is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. Ideal for prepared exhaust pipes, process piping and engine parts.
Jotun Aluminium Paint H.R. (Heat Resistant) is formulated to be used as an exterior aluminium finish usually within an alkyd system. Suitable as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates. As this paint is resistant to up to 250°C and is available in an aluminium finish, it is ideal for exhaust pipes, process piping and engine parts.
Carbon steel should be prepared to Sa 2.5. Aluminium should be at minimum hand or machine abraded with non-metallic abrasives or bonded fibre machine or hand abrasive pads to impart a scratch pattern to the surface and to remove all polish from the surface. Ideally it should have a cleanliness corresponding to description Sa1. Previously coated surfaces should be clean, dry and undamaged compatible coating.
Apply using air spray, airless spray. Use a brush for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness. Rollers may be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.
- Heat Resistant in dry, atmospheric environments for continuous exposure to 250°C
|Type:||Heat Resistant styrene modified oxidatively drying alkyd coating|
|VOC Content:||416.0g per Litre|
|Suitable Substrates:||Suitable for properly prepared carbon steel and aluminium substrates|
|Application Method:||Air Spray, Airless Spray, Brush or Roller for small areas and stripe coating|
|Theoretical Coverage:||22.5 - 15 m2 per litre|
|Wet Film Thickness (WFT):||45 - 65 microns|
|Dry Film Thickness (DFT):||20 - 30 microns|
|Touch Dry:||30 mins at 10°C|
|Overcoatable:||12 hours at 10°C|
|Cleaner / Thinner:||Jotun Thinner No.2|
|Shelf Life:||24 months|
|Packaging:||Available in 5 Litres|