Jotun Penguard Express B11

Jotun Penguard Express B11

SKU id10045 Part A and B: UN1263 (Class: 3, Pk Grp: III)
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111
£143.62 (£172.34 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£143.62 (£172.34 Inc VAT)

Product Description

Promain In Partnership With Check A Trade

Penguard Express B11 is a two component amine cured epoxy coating suitable for use on bridges and highway infrastructure structures, Item No.111.

Penguard Express B11 is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build paint coating. It conforms to the requirements of BS5493:1977.

Best Uses

Phenguard B11 has been formulated as high solids fast drying, zinc phosphate pigmented, high build paint coating. Phenguard B11 has been designed predominantly for use in new construction or for maintenance applications where a fast turn round and return to service is required. A further benefit of the Phenguard B11 is it is suitable for use as a primer, mid coat, finish coat or also as as single coat system when subject to normal atmospheric conditions.

Ideal for new construction or maintenance where fast dry to handle and over coating times are required Penguard Express is surface dry 1.5 hours at 23 degrees C.

Penguard Express can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for correctly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.

Approved to meet the requirements of UK Highway Agency Item No.111, for use on bridges and highway infrastructure and other steel structures used in the construction and marine industries.

Application

Phenguard B11 should be applied to properly prepared (sand blasted) carbon steel, aluminium, concrete as well as galvanised steel substrates. Phenguard can be applied to surfaces that are below zero but this will increase drying times, see data sheet for more information.

Recommended Products To Use


Jotun Hardtop XP

Jotun Hardtop XP

A hardwearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item...

From £48.63 (£58.36 Inc VAT)
Jotun Penguard Express B12

Jotun Penguard Express B12

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112

From £143.62 (£172.34 Inc VAT)
Jotun Thinners No 17

Jotun Thinners No 17

Jotun Thinners No.17 for use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.

From £19.95 (£23.94 Inc VAT)