Sherwin Williams Magnalux P1 (Formerly Leighs Duraglass P1) is a 2 pack vinyl ester based primer for use under all Sherwin Williams polyester and vinyl ester coatings.
Magnalux P1 is best used as a holding primer for use on both blast cleaned steel and concrete surfaces.
Magnalux P1 is best applied using airless spray, brush or roller. Use Sherwin Williams Cleanser / Thinner No13 for cleaning only. Do not thin. Indefinately overcoatable with itself or other Magnalux products.
- Pot Life: 45 minutes at 15°C
- Dry Film Thickness: 25 microns
- Theoretical Coverage: 24m2 per litre
- Drying Times: To touch 2 hours at 15°C, 2 hours to recoat at 15°C
- Available in Red Oxide
- Available in 5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.