£7.75 delivery on orders excluding certain products & postcodes *
Sherwin Williams Macropoxy M330 - Formerly Leighs Epigrip
SKU
ID9221
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
Available in 5 Litres in Red Oxide
From
£102.12
£85.10
In stock
Only %1 left
Product Description
Sherwin Williams Macropoxy M330 - Formerly Leighs Epigrip is a 2 pack epoxy tie sealer coat for use over zinc silicate and other types of zinc rich primers.
Best Uses
Sherwin Williams Macropoxy M330 is best used either as a blast primer for use over stainless steel or as a sealer coat for use over zinc silicate and other types of zinc rich primers.
Application
Recommended primers and top coats: Zinc Clad J984 Zinc Rich Primer and Zinc Clad II EU. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned.
Where a high degree of gloss and colour retention is required, overcoat with Acrolon C137V2, Acrolon C237 within 7 days at a minimum DFT of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. Recommended application using airless spray using thinner no5.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Technical Details
Technical Info
| Components: | Two Pack |
| Type: | Epoxy Tie Coat |
| Finish: | - |
| Stock Colours: | Red Oxide |
| Tintable: | No |
| VOC Content: | 463 gms/litre |
| Volume Solids: | 47 ± 2% |
| Suitable Substrates: | Stainless Steel |
| Application Method: | Airless Spray |
| Theoretical Coverage: | 18.8m2/ltr |
| Wet Film Thickness (WFT): | 53 microns |
| Dry Film Thickness (DFT): | 25 microns |
| Induction Time: | - |
| Pot Life: | 8 hours at 23°C |
| Touch Dry: | 10 minutes at 23°C |
| Overcoatable: | 4 hours at 23°C |
| To Handle: | days at 23°C |
| Cleaner / Thinner: | Thinner No.5 |
| Shelf Life: | 2 years from date of production unopened or 'use by' date where specified |
| Packaging: | Available in 5 Litres |
