Sherwin Williams Firetex C69 - Formerly Leighs

Sherwin Williams Firetex C69 - Formerly Leighs

SKU id4201
A two pack blast primer for Sherwin Williams Firetex intumescent coatings.
Available in 20 Litres
£170.67 (£204.80 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£170.67 (£204.80 Inc VAT)

Product Description

Sherwin Williams Firetex C69 - Formerly Leighs is a two pack blast primer for Sherwin Williams Firetex intumescent coatings.

Best Uses

Firetex C69 is suitable as a primer for Firetex intumescent coatings, which can be overcoated after 30 minutes offering a fast track solution to off site intumescent application.

Application

For optimum performance use round steek shot and blast clean to Sa2 1/2 BS EN ISO 8501-1:2007. Average surface profile in the range of 30-50 microns. Ensure surfaces are clean, dry and free from surface contamination. Firetex C69 can be either applied by airless or conventional sprayers. Recommended cleanser / thinner No5.

Recommended Products To Use


Sherwin Williams Firetex M71V3 Sheen Topcoat

Sherwin Williams Firetex M71V3 Sheen Topcoat

A sheen decorative topcoat for Firetex FX5120 providing protection when used in internal semicontrolled conditions.

From £52.02 (£62.42 Inc VAT)
Sherwin Williams Firetex M95/02 Epoxy Intumescent

Sherwin Williams Firetex M95/02 Epoxy Intumescent

An epoxy intumescent suitable for cellulosic fire protection for exterior blast cleaned steel.

£390.18 (£468.22 Inc VAT)
Sherwin Williams Firetex FX1003 Solvent Based Intumescent Coating

Sherwin Williams Firetex FX1003 Solvent Based Intumescent Coating

A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural s...

£312.96 (£375.55 Inc VAT)
Sherwin Williams Firetex FX13381-1 Solvent Based Intumescent

Sherwin Williams Firetex FX13381-1 Solvent Based Intumescent

A single pack thin film intumescent coating to provide 120 minute of fire resistance to structural steel.

£312.96 (£375.55 Inc VAT)
Sherwin Williams Firetex FX13381-2 Solvent Based Intumescent

Sherwin Williams Firetex FX13381-2 Solvent Based Intumescent

A single pack thin film 120 minute intumescent coating protector for in shop application via airless spray for structural ...

From £312.96 (£375.55 Inc VAT)
Sherwin Williams Firetex FX2003 Solvent Based Intumescent Coating

Sherwin Williams Firetex FX2003 Solvent Based Intumescent Coating

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

From £312.96 (£375.55 Inc VAT)
Sherwin Williams Firetex FX5060 Water Based Intumescent Coating

Sherwin Williams Firetex FX5060 Water Based Intumescent Coating

A water based TCEP free, thin film intumescent coating for protection up to 60 minutes on structural steel.

£199.40 (£239.28 Inc VAT)
Sherwin Williams Firetex FX5062 Water Based Intumescent

Sherwin Williams Firetex FX5062 Water Based Intumescent

A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.

£243.49 (£292.19 Inc VAT)