Sherwin Williams Macropoxy M182 - Formerly Leighs Resistex is a single pack, oil resisting anti corrosive primer for use onto ferrous substrates.
Macropoxy M182 is best used as an oil resisting primer for application onto ferrous substrates.
Recommended application method via airless spray, conventional spray, brush or dip/flow. Blast clean to Sa2½ BS EN ISO 8501-1:2007. Average surface profile in the range 30-50 microns. Ensure surfaces to be coated are clean, dry and free from all surface contamination. In conditions of high relative humidity, i.e. 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3°C above the dew point and always above 0°C. Application at ambient air temperatures below 5°C is not recommended. Recommended cleanser / thinner no5.
- Drying Time: 2 hours at 15°C to touch, 18 hours at 15°C to recoat
- Dry Film Thickness: 25 microns
- Theoretical Coverage: 11.1m2 per litre
- Available in Grey
- Available in 5 Litres