Please note there is a minimum order of 150 Litres on this product (10 x 5 Litres). If you do not require this amount please contact our Technical Team to discuss possible alternatives.
Sherwin Williams Transgard TG169 - Formerly Leighs is a high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention characteristics are required.
Sherwin Williams Transgard TG169 is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes. Good tolerance to low temperature curing conditions.
Recommended application methods via airless spray, conventional spray, brush or roller. Recommended cleanser / thinner no5 for cleaning, no15 for thinning. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Recommended primers Transgard TG112, TG121, M905, TG123, C123. Topcoats not normally required, but indefinitely overcoatable with itself and other high performance topcoats.
- Highways Agency Item No. 169
- Drying Times: 2.5 hours at 15°C to touch, 8 hours at 15°C to recoat
- Dry Film Thickness: 50 microns
- Theoretical Coverage: 10.8m2 per litre
- Pot Life: 5 hours at 15°C
- Available in white and a limited range of colours
- Available in 5 and 20 Litre units
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.