£7.75 delivery on orders excluding certain products & postcodes *
Sherwin Williams Transgard TG169 is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes. Good tolerance to low temperature curing conditions.
Recommended application methods via airless spray, conventional spray, brush or roller. Recommended cleanser / thinner no5 for cleaning, no15 for thinning. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Recommended primers Transgard TG112, TG121, M905, TG123, C123. Topcoats not normally required, but indefinitely overcoatable with itself and other high performance topcoats.
Components: | Two Pack |
Type: | Acrylic Urethane |
Finish: | Semi-Gloss |
Stock Colours: | White |
Tintable: | Yes, limited range. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 412 gms/litre |
Volume Solids: | 54 ± 3% |
Suitable Substrates: | Suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems |
Application Method: | Brush, Roller, Airless Spray or Conventional Spray |
Theoretical Coverage: | 10.8 m2/ltr |
Wet Film Thickness (WFT): | 92 microns |
Dry Film Thickness (DFT): | 50 microns |
Induction Time: | - |
Pot Life: | 3 hours at 23°C |
Touch Dry: | 1.5 hours at 23°C |
Overcoatable: | 6 hours at 23°C |
To Handle: | 16 hours at 23°C |
Cleaner / Thinner: | No.5 for cleaning, No.15 for thinning |
Shelf Life: | 12 months from date of production unopened or 'use by' date where specified |
Packaging: | Available in 5 Litres (Min order of 150 Litres) |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.