Coo-Var Line Marking Aerosol, 750ml

SKU
id980
Non Hazardous
A high performance spray paint with fast drying resins ideal for line marking paint and road marking paint on a variety of surfaces.
Available in Boxes of 6 x 750ml Aerosols
From £80.42 £67.02
In stock
Product Description

Coo Var Line Marking Aerosol Paint is a high performance spray paint with fast drying resins for line marking paint and road marking paint on a variety of surfaces.

This Line Marking Aerosol can be used with any of Promains Stencil range, including letters, wording and logos. Line Marking Aerosol is available in black, white, yellow, red, blue and green.

Best Uses

Coo-Var Line Marking Aerosol is best used when used with Coo Var 2 or 4 wheel spray aerosol applicator. When used together you can produce more accurate finishes. This means you will get better results and a neater, professional look.

Application

Ensure the surface is clean dry. Shake can vigorously for at least 1-2 minutes. Fit nozzle to upright can, invert and fit to applicator. Pull trigger of applicator to start marking. Speed of movement controls the "density" of the line. After use remove nozzle and store cans on their side to prevent "blocking".

Surfaces/Environment

Line Marking Aerosol is designed for the line marking traffic in car parks, tennis courts, gymnasiums, schools, road markings. With a fast drying time this Aerosol is suitable for walking and driving on almost immediately after use.

Technical Details

Features

  • Coo-Var Road Line Marking Aerosol Paints can be used with the Coo-Var 2 or 4 wheel spray aerosol paint applicator
  • This aerosol spray can be used with Promain stencils

Technical Info

Components: Single Pack
Type: Aerosol
Finish: Matt
Stock Colours: White, Yellow, Blue, Red, Green & Black
Tintable: No
VOC Content: N/A
Volume Solids: N/A
Suitable Substrates: Appropriate for a variety of surfaces both indoor & out including Bitumous, Tarmacadam & Concrete
Application Method: Aerosol
Theoretical Coverage: 60 to 100m long x 50mm wide line depending on application weight
Wet Film Thickness (WFT): N/A
Dry Film Thickness (DFT): N/A
Induction Time: N/A
Pot Life: N/A
Touch Dry: 15-30 minutes at 20°C
Hard Dry: After 2 hours at 20°C
Overcoating: Minimum overcoating time 2 hours at 20°C
Cleaner / Thinner: N/A
Shelf Life: -
Packaging: Available in boxes of 6 x 750ml Aerosol

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use