*Centrecoat Light Reflective Paint

SKU
ID1010
***
This product is now discontinued. See Soppec Reflect Light Aerosol as a potential alternative.
Out of stock
Product Description

Please note, this product is now discontinued. See Soppec Reflect Light Aerosol as a potential alternative.

Centrecoat Light Reflective Paint is a white paint that contains reflective beads to reflect a high degree of light back towards the light source.

Centrecoat Light Reflective Paint is a specially formulated water based acrylic resin based paint coating, combining graded levels of reflective beads to reflect a high degree of light back towards the light source. It will also provide a tough, durable, exterior or interior finish suitable for use on a wide range of substrates.

Best Uses

Centrecoat Light Reflective Paint is best used on Road Line's to reflect light back towards the light source. The idea of this is to make the lines clearly visible when illuminated by headlights. This increases road safety significantly and Light Reflective Paint is being used all over the world as we aim to prevent road accidents.

Application

Apply by Brush or Roller. No primer or undercoat is necessary unless used on ferrous metal or where staining could occur. For porous substrates thin the first coat with 30% water. Do not apply at temperatures below 8°C.

Surfaces/Environment

Centrecoat Light Reflective Paint is designed for use on Road Lines and is suitable for use in all kinds of environments where there is public transport.

Technical Details

Properties

  • A transparent acrylic coating
  • Light Reflective Line paint is highly thixotropic
  • Allow at least 7-14 days for delivery.

Technical Info

Components: Single Pack
Type: Acrylic resin based paint coating
Finish: -
Stock Colours: White
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: Exterior or interior finish suitable for use on a wide range of substrates
Application Method: Brush or Roller
Theoretical Coverage: Approximately 8-12 sq. metres/litre, depending on texture and porosity of substrate
Thinner: For porous substrates thin the first coat with 30% water
Dry Film Thickness (DFT): -
Flash Point: N/A
Pot Life: -
Drying Time: Normally recoatable after 4 hours, Optimum hardness is reached after 2 weeks
Cleaner: Clean with warm soapy water. 
Storage: Protect from frost. Keep out of reach of children.
Packaging: Available in 5 Litres

Related Products