Centrecoat Fast Drying Water Based Line Marking Paint for traffic lane marking, centre lines, car parking spaces, playgrounds on tarmac and concrete.
Centrecoat Water Based Line Marking Paint is a highly durable water based Line Marking for use on Asphalt, Tarmac and Concrete. With changing weather conditions and a risk of spontaneous rain showers, the drying time is less than 5 minute. Centrecoat Water Based Line Marking Paint is suitable for lane lines, edge lines and centre lines on roads and carriageways, as well as symbols, legends and parking bays. Centrecoat Water Based Line Marking Paint is available in 3 different colours and can be purchased in 5 litre and 18.5 litre tubs for small or professional, larger scale jobs.
Centrecoat Water Based Line Marking Paint is best used in conjunction with the Centrecoat Line Marking Machine for accurate traffic paint line marking in various different environments. Works as well on asphalt and tarmac as it does in concrete, with excellent adhesion properties and a hard wearing finish.
Centrecoat Water Based Line Marking Paint is a fast drying traffic paint formulated specifically for airless equipment and conventional air atomized equipment and smaller lane line striping equipment with or without hand applied glass beads. After 10 minutes (at 20°C.) the product will be touch dry, reaching full cure in 2 hours, ready for foot trafficking and light vehicle traffic. This product can be applied by brush or roller if required.
Surface and Environment
Centrecoat Water Based Line Marking Paint has been specifically designed for Road Line Marking but can be used in other areas that need areas distinguishing, such as, lane marking, car parking spaces, roads, roadways, carriageways, airports, ports, factories, car parks, schools, playgrounds and hard sports courts.
- Meets the requirements of TT-P-1952D Types I & II & TT-P-1952B
- FED-STD-595 color chip
- A non-flammable line marking paint
- No special solvents needed for this line marking paint
- Water based
- Offers a greater tolerance to new tarmac compared to solvent based paints
- Performs equally on both asphalt and concrete
- Demonstrates excellent bead retention
- Fast drying
- New asphalt and concrete should be allowed to cure for a minimum of 30 days before the application of line marking paint
- For thinning use water
|Type:||Water based acrylic|
|Stock Colours:||White, Yellow, Black, Green, Red|
|VOC Content:||150.0g per Litre|
|Suitable Substrates:||For asphalt or bitumen and concrete roads|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray - 18 thou tip size recommended|
|Theoretical Coverage:||42 linear metres per litre for a single 100mm wide lines|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||10 minutes at 20°C|
|Fully Cured:||2 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||24 months in original unopened containers|
|Packaging:||Available in 5 and 20 Litres (4 x 5 Litre Tins)|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.