Economy 100mm Thermoplastic Line Marking Tape is an economy, budget thermoplastic line marking tape for use during warm weather only.
This product is not suitable for application if ambient temperature is below 16°C.
This product is best used in private car parks and areas of low wear. This product does not have reflective glass beads. If you require a reflective line please see Centrecoat Thermoplastic Line Marking Tape.
Firstly remove the backing film, then the Thermoplastic Line Marking Tape should only be applied by using the correct Thermoplastic Gas Torch (please see recommended products) to melt the tape on to the substrate. After a few minutes the area is ready to return to service.
Due to the nature of application, Thermoplastic Line Marking Tape can be applied all year round, even in cold conditions. Centrecoat Thermoplastic lead free Line Marking Tape has a curing time of 10 minutes resulting in a fast return to service. Preformed thermoplastic must be applied at between 190- 200°C to ensure good adhesion. Thermoplastic lines must be stored at a minimum of 18°C or they become brittle.
- Thermoplastic Line Marking MUST be applied with a Thermoplastic Gas Torch
- Thermoplastic lines must be stored at a minimum of 18°C or they become brittle
- Drying time: 5 minutes
- DO NOT APPLY OVER EXISTING PAINTED LINES
- Preformed thermoplastic must be applied at between 190- 200°C to ensure good adhesion
- Use Tack Coat when applying to concrete
- Available in standard 5m long rolls.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.