Liquid Plastics Clearglaze is a waterproof clear coating for skylights, roof panels and north lights.
Liquid Plastics Clearglaze is a waterproof clear coating for skylights, roof panels and north lights. Clearglaze will provide you with a waterproof barrier that will still permit light into a building. It is particularly suitable for protecting porous stone, decorative aggregate panels and brickwork against water penetration and subsequent frost damage. In addition, Liquid Plastics Clearglaze provides an effective barrier to carbon dioxide diffusion, making it ideal for protecting reinforced concrete against carbonation.
Decothane Clearglaze has a high solids formulation which uses moisture to trigger the curing process but, unlike conventional moisture cured systems, will not foam when excess moisture is present. Consequently, it will continue to cure normally, even in wet conditions and therefore helps to keep contract time to a minimum. The cured membrane enhances natural substrate colours - producing a "wet look" finish which will not discolour with age or prolonged UV exposure. This makes it ideal for use outside and is strongly recommended for use where sun exposure is a concern.
Liquid Plastics Clearglaze should be applied using a brush or roller. Do not thin or brush out (like conventional paints). When using brushes, the first coat should be applied in one direction only, where possible, the second coat should be applied at right angles to the first. Avoid using wet equipment and ensure that brushes and rollers are completely dry before applying.
Surface and Environment
Clearglaze is suitable for use as a waterproof, anti-shatter coating over glass and rooflights. Combining toughness with excellent adhesion, the coating will prevent glass fragments splintering in the event of impact or explosion.
- A clear coating which may be used over glass, roof lights and other materials
- Clearglaze will provide a waterproof barrier that will still permit the continuous transmission of light into a building
- Liquid Plastics Clearglaze can be applied by brush
- Coverage is 0.5 m sq. per litre
- Available in 5 and 15 litre tins.