Rustoleum Magnetic Primer, 500ml

SKU
id4057
UN1263 (Class: 3, Pk Grp: III)
Can be applied to wood, metal, masonry, drywall, and plaster. Create a fun and unexpected way to hang notes, photos and more.
Available in 500ml
£28.38 £23.65
In stock
Product Description

Rustoleum Magnetic Primer has been manufactured as a base coat that attracts magnets. Rustoleum Magnetic Primer can be applied to a variety of surfaces, creating a fun and unexpected way of hanging notes, photos and general magnets.

This product is a high performance dark grey coloured coating that transforms a regular surface to one that attracts magnets whilst retaining a look that is seemingly normal.

Best Uses

Rustoleum Magnetic Primer works best when 2-3 coats are applied, and two coats of topcoat are applied afterwards for maximum magnetic attraction. Flat, Strong or low weighing magnets work best at adhering to the surface and can hang from a wall or surface that looks normal.

Application

Rustoleum Magnetic Primer can be applied using brush or roller, and offers an extremely fast drying time of just 1 hour that can be recoated after 4 hours. Rustoleum Magnetic Primer has a coverage rate of 1.7m2 per litre and has a dark grey finish.

Surface and Environment

Rustoleum Magnetic Primer should be used for interior applications only, onto surfaces made out of wood, metal, masonry, plaster or drywall. Once applied, you will be able to overcoat the surface with any latex paint for a decorative finish that magnets can cling to.

Technical Details

Features

  • Can be overcoated with emulsion or gloss.
  • Top coat with any latex paint or even Chalkboard paint.
  • Application of more than 2 coats of topcoat will reduce effectiveness of magnets. 
  • Indoor use only.

Technical Info

Components: Single Pack
Type: Solvent Based
Finish: Magnetic
Stock Colours: Dark Grey
Tintable: No
VOC Content: <420 g/l (3.50 lbs./gal.)
Volume Solids: -
Suitable Substrates: Wood, metal, masonry, drywall, plaster
Application Method: Use a foam roller designed to give a smooth finish
Theoretical Coverage: 185 sq.ft./quart - at 1 mil DFT (25μ)
Wet Film Thickness (WFT): 8.5-11.0 mils
Dry Film Thickness (DFT): 4.0-5.0 mils
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: It can be re-coated within itself after 30 minutes at 20°C. Apply any latex topcoat after 4 hours
Fully Cured: 48 hours at 20°C
Cleaner / Thinner: Thinning is not required. Wear gloves to clean tools with Xylene
Shelf Life: 5 years from date of production in unopened tins
Packaging: Available in 500ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use