Bedec Aqua Advanced SATIN

Bedec Aqua Advanced SATIN is a quick drying, water based, non-yellowing enamel for interior and exterior woodwork.

Designed for interior and exterior applications. Bedec Aqua Advanced has been innovatively designed, something in common with other Bedec products, to incorporate high quality, water-based technology. It is this modern technology that creates the finish you would expect from a leading brand name like Bedec.

Best Uses

Bedec Aqua Advanced SATIN is an extremely fast drying product that exhibits great durability, levelling and colour retention. It dries to provide users with a smooth enamel finish in either gloss or satin. It is also available as a primer. With a variety of uses and finishes, the versatility of Aqua Advanced puts it high up on our list of favourite products, which we have tried and tested ourselves. Promain understands how important it is for you to get a high-end product and high quality finish every time; which is why we choose to supply this paint.

• Bedec Aqua Advanced quick drying non-yellowing water based paint for interior and exterior use
• Water based
• Quick drying
• A non-yellowing paint
• Bedec Aqua Advanced offers excellent Flow
• Long-lasting
• for interior and exterior use on timber 

Application

Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash. Smooth glossy surfaces should be lightly abraded to provide a key. Bare steel should be free from rust, scale and dust. Before applying Bedec Waterbased All Metals Primer. Pressure treated timber should be weathered for at least six months prior to painting. Denatured wood should be abraded to reveal new cells. New planed, finished wood or PSE wood should also be abraded to open the grain and allow maximum penetration.

Where there is a risk of staining (Extractive discolouration) treatment with Bedec Stain Block is recommended. It is always advisable to test for staining by applying Aqua Advanced Enamels to a small area first. Knots should also be treated with Bedec Stain Block, Knotting solution is not recommended.

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried. On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

Surface and Environment

Bedec Aqua Advanced works well when applied in outdoor conditions but is ideal for interior coatings too. It results in a finish that will not yellow when exposed to sunlight. Suitable for application to most wooden substrates such as stair banisters and wooden indoor and garden furniture.