This product is now discontinued. Please contact our technical team for an alternative.
Bedec Water Based Fast Drying Acrylic Paint is designed for interior use on a variety of different surfaces in order to produce a neat eggshell finish.
Bedec Water Based Fast Drying Acrylic Paint is best used for painting most interior surfaces and is a high performing acrylic paint available in 2.5 litre containers.
Bedec Water Based Fast Drying Acrylic Paint i suitable for application to most substrates after suitable preparation and can be applied using a brush, roller or spray. Bedec Water Based Fast Drying Acrylic Paint has a theoretical coverage rate of 13-15m2 per litre and is touch dry in 2 hours at approximately 20 degrees celsius.
Surface and Environment
Bedec Water Based Fast Drying Acrylic Paint is suitable for use internally on a variety of different interior walls/surfaces made out of plaster, plasterboard, concrete and wood.
- Bedec water based eggshell finish for use on interior walls and wood work
- Suitable for application to most substrates after suitable preparation
- Apply by brush, roller or spray
- Coverage approximately 13-15 sq. meters per litre
- Dry in 2 hours at 18 degrees centigrade and 65% humidity
- Recoatable after 4 hours
- Available in 2.5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.