£7.75 delivery on orders excluding certain products & postcodes *
Bollom Flameguard Ultra Primer / Undercoat has been developed to offer excellent adhesion even when applied on masonry surfaces that have been coating with up to 10 layers of conventional paint, with no need to strip them. This prime has been designed solely for use in internal applications for a hard wearing finish.
Bollom Flameguard Ultra Primer / Undercoat can be applied using brush or roller for a finish that provides a high level of adhesion and hard wearing results. With fast drying characteristics, you can touch the surface after 2 hours and recoat the surface after 4 hours.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Bollom Flameguard Ultra Primer / Undercoat can be applied to all bare and previously painted, non-combustible surfaces such as plaster, cement, concrete, and old paint work, and is highly suited for blocking stains on porous surfaces, providing the perfect base coat for Flameguard Ulta Top coat finishes.
Components: | Single Pack |
Type: | Primer/Undercoat |
Finish: | Matt |
Stock Colours: | White |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 30g/l |
Volume Solids: | - |
Suitable Substrates: | Bare and previously painted non-combustible surfaces |
Application Method: | Brush or Roller |
Theoretical Coverage: | 12m2/litre per coat. One coat required. |
Wet Film Thickness (WFT): | Please contact our Technical Team |
Dry Film Thickness (DFT): | Please contact our Technical Team |
Induction Time: | Please contact our Technical Team |
Pot Life: | - |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | 4 hours at 20°C |
Fully Cured: | 8 hours at 20°C |
Cleaner / Thinner: | Do not thin. Clean equipment with warm water |
Shelf Life: | See tin for shelf life and storage information |
Packaging: | Available in 5 Litres |