Bollom Flameguard Ultra Acrylic Eggshell

SKU
id9972
Non Hazardous
Flameguard Ultra Acrylic Eggshell is a Class '0' fire rated protective and decorative top coat for interior walls and trim, easy to use as conventional paints and provides a high quality durable finish.
Available in 5 Litres
From £88.32 £73.60
In stock
Only %1 left
Product Description

Bollom Flameguard Ultra Acrylic Eggshell is a Class 0 rated protective and decorative topcoat for use over intumescent basecoats on interior walls, ceilings and trims.

Bollom Flameguard Ultra Acrylic Eggshell, a means of achieving your desired colour scheme and finish, whilst providing the highest possible fire rating (Class 0) on the painted surface. The paints are designed to inhibit surface spread of flame and heat release, providing vital escape time in the event of a fire.

Best Uses

Bollom Flameguard Ultra Acrylic Eggshell is a Class 0 rated protective and decorative top coat for interior walls and trim. It is as easy to use as conventional paints and provides a high quality, durable finish. Flameguard Ultra delivers Class '0' protection on masonry surfaces that have been already coated with up to 10 layers of conventional paint, as well as new masonry surfaces.

Application

Bollom Flameguard Ultra Acrylic Eggshell can be applied using brush or roller to achieve the desired thickness, with a theoretical coverage rate of 12m2 per litre and a surface that can be recoated after 4 hours. Bollom Flameguard Ultra Acrylic Eggshell is available in a variety of colours to provide a decorative and protective finish.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Surface and Environment

Bollom Flameguard Ultra Acrylic Eggshell can be applied to a variety of different wooden substrates and steel surfaces, providing the appropriate primer/base coat has been used. Please see our technical data for more information on which primers to use on which surface. Bollom Flameguard Ultra Acrylic Eggshell has been specifically developed for interior use to inhibit the spread of flame and give you valuable time in which to escape.

Technical Details

Features

  • Class 0 fire rating
  • For interior walls and trim
  • Hard wearing protective / decorative finish
  • Tested to BS476 Parts 6 and 7.
  • For new, bare or previously painted non-combustible surfaces it can be applied over Flameguard Ultra Primer / Undercoat. It can also be applied over Broflame Ultra Fire Protective Base Coat on wood surfaces and Brosteel Ultra 60 and Fireshield Ultra on steel surfaces.

Technical Info

Components: Single Pack
Type: Water Based
Finish: Eggshell
Stock Colours: White 
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 30g/l
Volume Solids: 45%
Suitable Substrates: Wood and Steel
Application Method: Brush, Roller or Conventional Spray
Theoretical Coverage: 12m2/litre per coat
Wet Film Thickness (WFT): Please contact our Technical Team
Dry Film Thickness (DFT): Please contact our Technical Team
Induction Time: Please contact our Technical Team
Pot Life: -
Touch Dry: 4 hours at 20°C per coat
Overcoatable: Allow to dry for a minimum of 4hrs @20°C between coats
Fully Cured: -
Cleaner / Thinner: Do not thin. Clean equipment with warm water
Shelf Life: See tin for shelf life and stoarge information
Packaging: Available in 5 Litres
Product Video

Related Products