*Bradite Chlorinated Rubber Primer CP26

SKU
ID19149
***
This product is now discontinued. See Teamac Metaclor as a potential alternative.
In stock
Product Description

Please note, this product is now discontinued. See Teamac Metaclor as a potential alternative.

Bradite Chlorinated Rubber Primer CP26 is a high performance single pack chlorinated rubber anti-corrosive primer with excellent chemical & water resistance. A quick drying anti-corrosive paint with excellent water and good chemical resistance, for use on suitably prepared ferrous surfaces.

Best Uses

Bradite Chlorinated Rubber Primer CP26 is best used on ferrous substrates which are dry, free of contamination, dust, efflorescence laitance and have been properly prepared. Compatibility with existing coatings should be confirmed by preparing and painting a test patch.

Please note Bradite CR Primer CP26 is unsuitable for epoxy tar & bitumen painted surfaces.

Application

Substrate should be dust free and completely dry before coating. High pressure water cleaning to remove all loose and flaking paint and contamination back to a sound substrate. For best performance, complete vacuum blast cleaning of the substrate is recommended. Bradite TD39 industrial strength detergent washing and rinsing should be used with scrubbing to remove grease or oil.

Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge. Cracks and pits should be filled using a suitable screed or mortar before painting.

Steel should be blast cleaned to SIS-Sa 2½ minimum, blast profile 35-50 microns and surface free of soluble salts, or de-rusted manually or mechanically to SIS-St 3 minimum.

Painting System – Industrial New Build & Maintenance
1st coat Bradite Chlorinated Rubber Eggshell CP26
2nd coat Bradite Chlorinated Rubber Eggshell CC24
3rd coat Bradite Chlorinated Rubber Eggshell CC24*
* For a gloss finish, substitute final coat with Bradite Chlorinated Rubber Gloss CG23

Technical Details

Certificates & Approvals

  • Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems

Notes

  • For galvanised steel and other non-ferrous surfaces, the first coat should be substituted with Bradite Barrier Primer EU96.
  • For maintenance, the first coat will be spot priming exposed substrate only.

Technical Info

Components: Single Pack
Type: Primer
Finish: Eggshell
Stock Colours: Light Grey
Tintable: No
VOC Content: 525 g/L
Volume Solids: 40%
Suitable Substrates: Steel, blast cleaned to SIS – Sa 21/2 minimum, or mechanically prepared to SIS – St 3. Previous suitable coat dry, clean and abraded as necessary.
Application Method: Brush, Roller & Spray
Theoretical Coverage: 10 m2/L/coat
Wet Film Thickness (WFT): 100 microns/coat
Dry Film Thickness (DFT): 40 microns/coat
Induction Time: -
Pot Life: -
Surface Dry: 30 minutes at 20°C
Overcoatable: After minimum 8 hours at 20°C
Fully Cured: 6 days at 20°C
Cleaner / Thinner: Bradite Thinner TC32
Shelf Life: 12 months minimum in original unopened containers
Packaging: Available in 4.7 Litres

Related Products