Bradite Epoxy Coating Finish EC88 is a solvent-based, 2 pack epoxy coating and finish paint for concrete and suitably primed steel floors. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Bradite Epoxy Coating Finish is best used on interior concrete, wood or steel floors requiring a tough, quick drying, hard wearing flexible floor coating with good chemical and excellent water resistance. It can also be used with Bradite Low Slip Additives SA14 or SA12 to help provide additional under foot traction. This product is ideally suited for the refurbishment of fibreglass swimming pools, having excellent water immersion resistance, good chemical resistance and produces a surface that is easy to clean.
Compatibility with existing coatings should be confirmed by preparing and painting a test patch. (Note, not suitable for applying over asphalt, bitumen, epoxy tar, alkyd, chlorinated rubber or vinyl based paints.)
Application and use should always conform to the codes of practice described in BS 6150 and BS 5493.
Substrates should be dust free and completely dry before coating. When painting concrete it is vital to ensure that the substrate is completely dry and free of laitance. Power floated, shiny or unpainted non porous concrete floors should be thoroughly vacuum blast cleaned to a roughness profile of 30-50 microns, or acid etched using Bradite TA37, or primed using Bradite Floor Primer ES40. Please consult the product data sheet for more details.
High pressure water cleaning should be utilised to remove all loose and flaking paint and contamination back to a sound substrate. Bradite TD39 industrial strength detergent should be used if necessary to remove all grease and oil. Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge. Cracks and pits should be filled using a suitable screed or mortar before painting. Substrate should be dust free and completely dry before coating. Cracks and pits should be filled using a suitable screed or mortar before painting. Substrate should be dust free and completely dry before coating.
See the product data sheet for more information on painting systems for concrete, wood or other absorbent surfaces, and Fibreglass Swimming Pool preparation.
Certificates & Approvals
- Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
- 2004/42/EC EU limit value for this product (cat.A/j sb): 500g/l (2010). This product contains max. 408 g/l VOC.
|Stock Colours:||Call to confirm|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||408 g/L|
|Volume Solids:||52% (mixed)|
|Suitable Substrates:||Concrete & steel floors, clean, free of contamination, dust, efflorescence, dry & suitably prepared. Interior use.|
|Application Method:||Brush, Roller, Spray|
|Theoretical Coverage:||11 m2/L/coat|
|Wet Film Thickness (WFT):||100 microns/coat|
|Dry Film Thickness (DFT):||52 microns/coat|
|Pot Life:||2-3 hours at 20°C|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||After minimum 14 hours or maximum of 6 days at 20°C|
|Fully Cured:||6 days at 20°C|
|Cleaner / Thinner:||Bradite Thinner TE36|
|Shelf Life:||12 months minimum in original unopened containers.|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.