Centrecoat Anti Slip Tape Adhesive Primer has been designed for priming surfaces prior to the application of anti slip tapes and offer maximum adhesion for a longer lasting product lifetime.
Anti Slip Tape Adhesive Primer can be used in all tricky and difficult areas where anti slip tape may not adhere to the surface properly due to conditions or environments and works to create a better bond.
Anti Slip Tape Adhesive Primer can be applied using brush or roller and offers excellent flow and application properties to ensure a smooth process. This top of the range primer has a theoretical coverage rate of 5m2 per litre and is highly adhesive.
Surface and Environment
Anti Slip Tape Adhesive Primer can be used on all porous surfaces such as wood, concrete and stone and works to prevent any moisture or water attacking the bottom layer of the adhesive from below ground level by blocking the pores and capillaries found in the substrate.
- This primer is ideal for use for on porous surfaces (wood, concrete, stone etc) it prevents any water attacking the adhesive from underneath.
- Helps in all situations to create better bond for anti slip tape in difficult areas.
|Suitable Substrates:||For wood, concrete or stone prior to application of our anti slip tape to prevent moisture degrading the adhesive; it also greatly helps to create an extra bond on other surfaces|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||5 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||-|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 1 Litre|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.