£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat Etch Primer
SKU
id3875
UN1263 (Class: 3, Pk Grp: III)
A rapid dry primer for steel and galvanised surfaces containing anti-corrosive pigment and improves surface adhesion.
Available in 5 Litres
From
£82.60
£68.83
In stock
Only %1 left
Product Description
Centrecoat
Centrecoat
Etch Primer is a rapid drying, adhesive primer coating for metal substrates including galvanised surfaces.
Centrecoat Etch Primer is a rapid drying metal primer which is designed for use on galvanised surfaces. Centrecoat Etch Primer has been specially formulated without zinc chromates in order to reduce the risk of toxicity.
Best Uses
Centrecoat Etch Primer offers users a product with fast drying properties that provides a good base for a wide range of topcoats and is suitable for metallic substrates. Centrecoat Etch Primer contains anti-corrosive pigments, and its main purpose is to improve the adhesion for following-on coats of paint.
Application
Centrecoat Etch Primer is suitable for application with a brush, roller or spray onto a variety of metal substrates. It provides a highly adhesive undercoat in preparation for the application of a decorative topcoat.
Centrecoat Etch Primer is available in 5 litre containers and offers users a theoretical coverage rate of 11.5 square metres per litre, per coat.
Surface and Environment
Centrecoat Etch Primer is suitable for stoving or air drying application to pre-cleaned ferrous and non-ferrous metals.
Technical Details
Features
- Provides a good adhesion base for a wide range of top coats
- Suitable for stoving or air drying application
- Formulated without zinc chromates to reduce toxicity risk
- Contains anti-corrosive pigment
- Improves adhesion of follow-on coats of paints
Technical Info
| Components: | Single Pack |
| Type: | Etch Primer |
| Finish: | - |
| Stock Colours: | N/A |
| Tintable: | No |
| VOC Content: | 670 g/L (± 5) depending on colour shade |
| Volume Solids: | Volume Solids typically 20% (± 5%), Mass Solids typically 36% (± 1%) |
| Suitable Substrates: | Mild steel, zinc coated steel |
| Application Method: | Conventional spray application |
| Theoretical Coverage: | Approximately 8 – 10 m2 per litre based on a dry film thickness of 25 microns at 100% transfer efficiency |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 20-30 minutes at 20°C |
| Overcoatable: | Within 12 hours of applying the etch primer |
| Hard Dry: | 4-6 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | The use of Gun Cleaners is recommended for cleaning guns, brushes and rollers. Thin with either Centrecoat Etch Primer Thinner |
| Shelf Life: | 12 months from date of manufacture (unopened cans) |
| Packaging: | Available in 5 Litres |
Related Products
PPG SigmaFast 20
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
From
£49.14
£40.95
Rustoleum 7500 Alkythane GLOSS
Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.
From
£99.18
£82.65
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Teamac P218 Rapidry Hi-Build Zinc Phosphate Primer
An anti corrosive, metal primer for iron and steel.
From
£76.82
£64.02
PPG SigmaZinc 19 Zinc Rich Epoxy
Formerly Amercoat 160 HF. A one component zinc rich epoxy primer.
£114.91
£95.76
Zinga 96% Zinc Cathodic Protection Galvanizing Paint
A one pack coating that contains 96% zinc to provide cold galvanizing cathodic protection of ferrous metals.
From
£24.25
£20.21
Fosroc Galvafroid Anti Corrosion Galvanizing Paint
A zinc rich coating formulated as an easily applied, cold galvanising protector against corrosion on all ferrous metals.
From
£52.98
£44.15