£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat Crack Filler is ideal for rapid repairs to concrete floors, warehouse floors, ramps, steps, brickwork and masonry. It is also used for filling voids in areas where little or no movement is anticipated. Water and weather resistant, Centrecoat Crack Filler is suitable for use on damp or dry surfaces.
Surfaces to be treated need to be clean, sound and free from contaminants. Pour the curing agent into the base container and mix thoroughly (preferably using a mechanical mixer) until a uniform consistency is achieved. If you intend to part mix, you should use the ratio of 3 volumes Base to 1 volume Curing Agent. This must be done with care.
Once thoroughly mixed, apply the Centrecoat Crack Filler by gravity feed or by gunning or pumping into cracks. For filling voids and craters, simply fill by pouring.
Once the resin has cured, it can be ground down to a level finish, or topped up if the level sinks.
Components: | Two Pack |
Type: | Solvent Free |
Finish: | - |
Stock Colours: | - |
Tintable: | No |
VOC Content: | - |
Volume Solids: | - |
Suitable Substrates: | Concrete, Brickwork, Masonry |
Application Method: | Gravity feed, Gunning or Pumping |
Theoretical Coverage: | Dependent on the depth & extent of cracks or voids within the substrate |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | 10-15 minutes at 20°C |
Touch Dry: | 1-2 hours at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Clean equipment with Centrecoat MMA Tool Cleaner |
Shelf Life: | 12 months from date of production unopened |
Packaging: | Available in 2 Litres and 5 Litres |