Centrecoat Thermoplastic Gas Torch for use with a propane gas bottle to heat thermoplastic lines and logs when applying to tarmac or concrete roads, playgrounds etc.
Promain are able to supply a Thermoplastic Gas Torch for use with a propane gas bottle (not supplied), that is designed for use with our selection of thermoplastic products. Create words and numbers for warnings and signs designed for commercial use and in some cases residential use.
Use the Thermoplastic Gas torch with thermoplastic letters, thermoplastic numbers, thermoplastic logos and thermoplastic stencils on a variety of different surfaces to create a durable finish that can be walked on and driven over within minutes.
The Thermoplastic Gas torch is easy to use and should only be handled by a responsible adult. The gas torch is a tool that literally attaches to a gas bottle (not provided) and works by manual application. Hold the torch 10-15cm away from the thermoplastic products to apply the correct amount of heat, that will leave you a finish that dries within minutes.
Surface and Environment
The Thermoplastic Gas Torch can be used in playgrounds, car parks, on roads and paths to produce lines, logos, letters and numbers and can be used on almost any different surface.
- Gas Torch with single head.
- For use when applying Thermoplastic lines or logos.
- Supplied with 5m hose and regulator.
- You will require a propane gas bottle
- Fuel not included
- Burner Size: 60mm
- Lance Length: 600mm
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.