Coo-Var Oil Based Brick and Tile Paint is an alkyd based versatile gloss red finish for most brickwork, masonry or stone.
Coo-Var Brick and Tile Paint Gloss Red is ideal for use on porches, front walls, out buildings, most brickwork, masonry or stone.
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Mix well before use. Apply direct to stable surfaces.
|Type:||Oil Based Alkyd|
|VOC Content:||399 g/L|
|Suitable Substrates:||For use on most brickwork, masonry or stone|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||13 m2 per litre at 40 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||35 - 40 microns|
|Touch Dry:||5 hours at 20°C|
|Overcoatable:||After 12 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||See container|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.