Hempel Silvium 51570

SKU
id21272
UN1263 (Class: 3, Pk Grp: III)
An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.
Available in 5 and 20 Litres in 19000 Aluminium
From £57.52 £47.93
In stock
Only %1 left
Product Description

Hempel Silvium 51570 is an oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.

Best Uses

Hempel Silvium 51570 is formulated for the protection of hot pipelines, exhaust pipes, smoke stacks and other hot surfaces up to peak temperatures of 250°C/482°F and up to permanent temperatures of 200°C/392°F. Hempel Silvium 51570 is also suitable as a finishing coat on steel and woodwork exterior and interior in a mild to moderately corrosive environment where an aluminium surface or light reflection is desired.

Application

Preparation Of New Steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Power tool cleaning to St 3 or abrasive blasting to Sa 2 (ISO 8501-1:2007). Prime with: Hempalin

Preparation For Repair and Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. Prime with: Hempalin. Touch up bare spots with: Hempel Silvium 51570.

Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

Spray application is recommended. If applied by brush, use a flat brush not more than 10 cm/4 inches wide. Do not dilute. After the paint has been distributed, it should be laid off with light strokes and in one direction only. If the paint is worked too much with brush or roller, it will become streaky and greyish and lose its lustre. This effect is cosmetic only and has no influence on the protective properties. Finish: At high temperatures, the paint will become greyish and lose its lustre. This effect is cosmetic only and has no influence on the protective properties.

Technical Details

Approvals

  • Tested according to section 175.300 of the Code of Federal Regulations Title 21 - Dry Foodstuff
  • Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain

Technical Info

Components: Single Pack
Type: Oleoresinous Aluminium
Finish: Gloss
Stock Colours: 19000 Aluminium
Tintable: No
VOC Content: 505 g/L
Volume Solids: 38%
Suitable Substrates: For protection of hot pipelines, exhaust pipes, smoke stacks and other hot surfaces upto peak temperatures of 250°C/482°F and upto permanent temperatures of 200°C/392°F
Application Method: Airless spray / Air spray / Brush
Theoretical Coverage: 15.2 m2 per litre at 25 microns
Wet Film Thickness (WFT): Dependant on Specification
Dry Film Thickness (DFT): Dependant on Specification
Induction Time: -
Pot Life: -
Surface Dry: 1 hour at 20°C
Overcoatable: Depending on Specification
Through Dry: 3.5 hours at 20°C
Cleaner / Thinner: Do not dilute. Clean up with Hempel Thinner 08080
Shelf Life: 5 years (25°C/77°F) from time of production
Packaging: Available in 5 and 20 Litres

Related Products