£7.75 delivery on orders excluding certain products & postcodes *
Hempel Pro Acrylic 55883 QD
SKU
ID19319
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: Non Hazardous
Suitable for use as a finishing coat for protection of structural steel.
Available in 5 and 20 Litres
From
£105.22
£87.68
In stock
Only %1 left
Product Description
Hempel Pro Acrylic 55883 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spillage of aliphatic hydrocarbons. Minimum curing temperature is 0°C/32°F. Conforms to Norsok M-501, system no. 1.
Best Uses
Hempel Pro Acrylic 55883 is best used as a finishing coat for protection of structural steel in severely corrosive environment, where light fastness and gloss retention are required.
Application
SURFACE PREPARATION: According to specification
Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Minimum temperature for curing is: 0°C/32°F. In confined spaces, provide adequate ventilation during application and drying.
Technical Details
Certificates & Approvals
- Conforms to Norsok M-501, system no. 1 (Pre-Qualified)
Notes
- Certain lead-free red and yellow colours may discolour when exposed to chlorine-containing atmosphere.
- May be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate and may influence drying time and overcoating interval. Normal range dry is: 50-100 micron/2-4 mils
Technical Info
| Components: | Two Component |
| Type: | Isocyanate-free, acrylic finishing coat |
| Finish: | Gloss |
| Stock Colours: | White |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 430 g/l [3.6 lbs/US gallon] |
| Volume Solids: | 54 ± 1% |
| Suitable Substrates: | Steel |
| Application Method: | Airless spray / Brush |
| Theoretical Coverage: | 10.8 m2/l [433.1 sq.ft./US gallon] - 50 micron/2 mils |
| Wet Film Thickness (WFT): | 75 micron [3 mils] |
| Dry Film Thickness (DFT): | 50 micron [2 mils] |
| Induction Time: | - |
| Pot Life: | 4 hour(s) 20°C/68°F |
| Surface Dry: | 4.5 hour(s) 20°C/68°F |
| Overcoatable: | According to specification |
| Fully Cured: | 7 day(s) 20°C/68°F |
| Cleaner / Thinner: | Thinner 08450 |
| Shelf Life: | 3 years for Base and 1 year (25°C/77°F) for Curing Agent from time of production |
| Packaging: | Available in 5 and 20 Litres |
Related Products
Hempel Hempadur AvantGuard 750
A versatile primer for long-term protection of steel in severely corrosive environments.
£280.97
£234.14
Hempel Hempadur 47300
A two-component epoxy paint, which cures to a hard and tough coating.
£209.89
£174.91
Hempel Thinner 08450
Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.
From
£33.59
£27.99
Hempel Hempadur 45143
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
From
£54.00
£45.00
Hempel Galvosil 15700
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
£238.50
£198.75
Hempel Hempadur Quattro XO 17870
A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.
From
£249.54
£207.95
Hempel Hempathane HS 55610
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
From
£76.32
£63.60
