Hempel Hempadur 47960

SKU
id22581
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A high build epoxy coating for the protection of metal substrates against atmospheric corrosion. Network Rail Approved.
Available in 20 Litres
From £271.19 £225.99
In stock
Only %1 left
Product Description

Hempel Hempadur 47960 is a high build epoxy paint for use as a primer, mid or finish coat, depending on levels of atmospheric corrosion.

Hempadur 47960 is a two-component high build epoxy paint which combines a high volume solids content with quick drying properties. Hempadur 47960 is VOC compliant, has prolonged re-coating properties and is pigmented with zinc phosphate.

Best Uses

Hempel Hempadur 47960 is recommended for use as a primer in atmospheric environments. It can also be used as an intermediate or finishing coat in epoxy systems, for medium to severely corrosive atmospheric environments.

Application

Hempadur 47960 is for professional use only. It should be applied to clean and dry surfaces, with temperatures above dew point to avoid condensation. New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPADUR 47960.

Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 0°C/32°F. The temperature of the paint itself should be: 15-25°C/59-77°F to secure proper application properties. In confined spaces, provide adequate ventilation during application and drying. It is important that the surface is completely clean to ensure the adhesion. Any oil, grease, etc. to be removed by suitable detergent.

Surface and Environment

New steel surfaces should be mechanically blasted, before the application of Hempadur 47960. All surfaces should be completely clean and free from oil or grease. Adequate ventilation should be provided, in confined spaces, during the application and drying process.

Technical Details

Approvals

  • Part of the Network Rail Specification NR/L3/CIV/039
  • Certificate number N1/109, N1/110, N9/036 and N9/037

Technical Info

Components: Two Part
Type: Polyamide Adducts Cured
Finish: Semi Gloss
Stock Colours: 11480 Grey, 50710 Red
Tintable: Yes, upon request. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 245.0g per Litre
Volume Solids: 75%
Suitable Substrates: For steel
Application Method: Brush or Airless Spray
Theoretical Coverage: 6 m2 per litre at 125 microns
Wet Film Thickness (WFT): 175 microns
Dry Film Thickness (DFT): 125 microns
Induction Time: -
Pot Life: 1 hour at 20°C
Touch Dry: 1 hour at 20°C
Overcoatable: According to specification
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Clean tools with HEMPEL'S TOOL CLEANER 99610. Thinner required depending on purpose. Usually less than: 5% HEMPEL'S THINNER 08450
Shelf Life:  
Packaging: Available in 20 Litres

Related Products