£7.75 delivery on orders excluding certain products & postcodes *
Hempel Hempatex Enamel 56360
SKU
ID21339
UN1263 (Class: 3, Pk Grp: III)
A finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention.
Available in 5 and 20 Litres. Tintable to many RAL and BS shades.
From
£56.35
£46.96
In stock
Only %1 left
Product Description
Hempel Hempatex Enamel 56360 is a finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention. Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.
Best Uses
Hempel Hempatex Enamel 56360 is formulated as an interior and exterior finishing coat in HEMPATEX systems in moderately to severely corrosive environment.
Application
Preparation For New Steel: According to specification.
Preparation For Repair and Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. Touch up bare spots to full film thickness.
Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
If a skid-proof surface is desired, sprinkle while paint is still wet HEMPEL'S ANTI-SLINT 67500 evenly on the first coat of: Hempel Hempatex Enamel 56360. When the paint is dry, sweep up surplus grit and apply a second coat of: Hempel Hempatex Enamel 56360. Anti-skid properties can be obtained by mixing 1.0 kg of Hempel Anti-Slip Beads 67420 into: 20 litres Hempel Hempatex Enamel 56360.
Technical Details
| Components: | Single Pack |
| Type: | Acrylic Resin |
| Finish: | Gloss |
| Stock Colours: | 10000 White |
| Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 594 g/L |
| Volume Solids: | 32% |
| Suitable Substrates: | For use within a Hempatex System |
| Application Method: | Airless spray / Air spray / Brush |
| Theoretical Coverage: | 9.1 m2 per litre in 35 microns |
| Wet Film Thickness (WFT): | 100 microns |
| Dry Film Thickness (DFT): | 35 microns |
| Induction Time: | - |
| Pot Life: | - |
| Surface Dry: | 1 hour at 20°C |
| Overcoatable: | According To Specification |
| Thorugh Dry: | 1 hour at 20°C |
| Cleaner / Thinner: | HEMPEL'S THINNER 08080 |
| Shelf Life: | 5 years (25°C/77°F) from time of production |
| Packaging: | Available in 5 and 20 Litres |
Related Products
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
RODO All Purpose Paint and Varnish Paint Brush
A general contractor all purpose paint brush in various sizes.
From
£2.69
£2.24
Hempel Hempatex Hi-Build 46410 Container and Cladding Paint
A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.
From
£41.09
£34.24
Hempel Light Clean 99350
Cleaner/Degreaser for use in the metal industry as well as ships and shipyards.
£124.64
£103.87
RODO ProDec Wet Paint Tape WPT200, 60mm x 200m
Wet Paint Warning Tape is a high visibility tape for marking out freshly painted areas.
£13.39
£11.16
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Hempel Anti-Slint 67500
Formulated to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.
£21.90
£18.25
Hempel Thinner 08080
Specifically designed for use with the Hempathane range of coatings from Hempel.
From
£32.11
£26.76