International Paints Primers & Tie Coats

A two component epoxy sealer coat pigmented with aluminium flake.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A two component epoxy holding primer.

A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

A quick drying single pack primer for maintenance above water areas that is compatible with most substrates.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A primer for vinyl ester schemes over both steel and concrete.

A low viscosity Primer/Saturant for steel and concrete.

Provides rapid cure and overcoating even under low temperature conditions.

A VOC compliant, single component, water based anti-corrosive primer/finish.

This product is now discontinued.

A two pack, tar free, modified epoxy tie coat.

A high performance anti-corrosive zinc rich primer for heavy industry.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.

A solvent free, water based primer for correctly prepared steel.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two pack, silicone elastomer tie coat for new building or maintenance and repair.

A three pack tie coat for use with International Intersleek systems.