Johnstones Trade Smooth Metal Paint is a primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish.
Johnstones Trade Smooth Metal Paint offering up to 5 years protection extending standard maintenance cycles. Johnstone’s Smooth Metal Paint offers anti-corrosive properties whilst maintaining excellent adhesion attributes. This product can be applied over unprimed, pre-primed and sound previously painted metal work and is particularly suitable for renovation of corroded substrates, after manual removal of loose layers of rust. It can be used on steel cast iron and other steel construction elements.
All surfaces should be sound, clean, dry and free from grease. Remove any crazed or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Stir well before use. Apply only by brush. The brush should be fully loaded for best results. One coat will provide adequate film build and opacity; however two coats will offer added protection and coverage. If more than one tin is to be used, intermix prior to use.
|Stock Colours:||Black, White, Silver, Gold, Red|
|Tintable:||Tintable to 10,000 colours via Johnstone’s Tinting System including RAL, BS and NCS shades. Please note, bespoke tints are non refundable / exchangeable.|
|VOC Content:||500.0g per Litre|
|Suitable Substrates:||Can be applied direct to bare, previously painted or rusted metal|
|Theoretical Coverage:||10 m2 per litre|
|Wet Film Thickness (WFT):||111 microns|
|Dry Film Thickness (DFT):||50 microns|
|Overcoatable:||After 2 hours at 20°C|
|Fully Cured:||16 - 24 hours at 20°C|
|Cleaner / Thinner:||White Spirit|
|Shelf Life:||5 years|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.