£7.50 delivery on orders excluding certain products & postcodes *
Johnstones Solar Reflective Paint is ideal for roofs as a solar reflective, quick drying coating that reduces the heat build up in rooms below. Available in metallic silver.
All surfaces to be painted should be clean, dry and free from loose, flaking material, dirt and grease. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
Johnstone’s Solar Reflective Paint will cover at the rate of approximately 10 square metres per litre depending on the nature and porosity of the surface being painted.
Components: | One Part |
Type: | Bituminous aluminium coating |
Finish: | Metallic lustre |
Stock Colours: | Metallic Silver |
Tintable: | No |
VOC Content: | 392.0g per Litre |
Volume Solids: | 25 - 50% |
Suitable Substrates: | Suitable for the protection of properly prepared steel, asphalt and bituminous substrates. |
Application Method: | Brush with a minimum of 2 coats |
Theoretical Coverage: | 10 m2 per litre depending on substrate |
Wet Film Thickness (WFT): | 53 microns |
Dry Film Thickness (DFT): | 25 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 4 - 6 hours at 20°C |
Overcoatable: | After 16 - 24 hours at 20°C |
Fully Cured: | |
Cleaner / Thinner: | White Spirit |
Shelf Life: | |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.