Johnstone's Anti-Mould Acrylic is a durable acrylic resin based mould inhibiting coating for use on walls and ceilings to protect against algal and fungal growth. Dries to a smooth, matt finish.
Johnstone's Anti-Mould Acrylic is best used in areas where conditions are conducive to mould growth, eg. food preparation areas and bathrooms. Use only in accordance with the directions on the label. Johnstone's Anti-Mould Acrylic is suitable for interior use only. This product is durable and washable.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Wear a suitable face mask when dry sanding. Surfaces already contaminated with mould growth should be treated with Johnstone’s Sterilisation Wash as directed.
Stir well before use. Suitable for application by brush or roller. Also suitable for application by spray. Seal absorbent surfaces with a coat of Anti-Mould Acrylic thinned with up to 10% clean water. Do not apply in temperatures below 5˚C.
|Type:||Water Based Acrylic|
|Stock Colours:||Brilliant White, Magnolia|
|Tintable:||Yes, upon request to Johnstones Shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||29.0g per Litre|
|Suitable Substrates:||For internal walls and ceilings|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||9 - 11 m2 per litre|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||30 microns|
|Touch Dry:||1 - 2 hours at 20°C|
|Overcoatable:||After 4 - 6 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.