£7.75 delivery on orders excluding certain products & postcodes *
Johnstone’s Aqua Water Based Gloss is specially formulated to give all the application and appearance characteristics of traditional gloss with the added advantage of being quick drying and low odour during application. Johnstone’s Aqua Water Based Gloss should be used in conjunction with Johnstone’s Aqua Water Based Undercoat to give the best possible finish.
Suitable for interior and exterior use on wood and metal.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare wood surfaces with Johnstone’s Aqua Water Based Undercoat. Prime all other bare surfaces with the appropriate Johnstone’s primer. Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal, as they may contain harmful lead.
Stir well before use. Easy to apply by brush. Avoid overspreading. Do not apply in temperatures below 10˚C or externally when rain is imminent. For best results, use a good quality synthetic brush.
Solvent: | Water Based |
Finish: | Gloss |
Stock Colours: | |
Tintable: | Yes to Johnstones 16,000 Colour Range. Please note, bespoke tints are non refundable / exchangable. |
VOC Content: | Low VOC content 0.3–7.99% |
Volume Solids: | 41.9% |
Suitable Substrates: | Ideal for interior and exterior wood and metal |
Application Method: | Brush |
Theoretical Coverage: | 10 - 12 m2 per litre |
Wet Film Thickness (WFT): | 91μm |
Dry Film Thickness (DFT): | 38μm |
Touch Dry: | 1 - 2 hours |
Recoatable: | 4 - 6 hours |
Cleaner / Thinner: | Water |
Shelf Life: | |
Packaging: | 2.5 and 5 Litres |