Jotun Marine and Coastal

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

This product is now discontinued. See Jotun Hardtop AX as a potential alternative.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.

A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

This product is now discontinued. See Jotun Hardtop XP as a potential alternative.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

A two component epoxy mastic coating for repair and maintenance.

A 2 pack structural steel and piping coating that will continue to cure while immersed.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...